| Synthetic Blades | |||||||
 |
ProPoly |  |
|||||
| Most commonly
used on wire return rolls, and poly covered press rolls and other wet
parts. ProPoly is recommended for roll cover
hardness’ of 12 P&J and softer. A variety of ProPoly configurations
are available including reinforced and self-lubricating. High Density Polyethylene/ Heat Resistance 194F Use the key at left to choose type of blade...Wet, Press or Dry (High Temperature). |
|||||||
 |
ProMica |
|
 |
||||
|
|||||||
For use in wire sections
and on press felt rolls. This blade material has better doctoring
characteristics than ProPoly and is recommended
for roll cover hardness’ of 8-12 P&J. |
|||||||
 |
ProFibre | |
 |
||||
All purpose blade most often used in forming wire
section DST holders and lower temp dryer sections. Glass Fibre- Epoxy Resin Blade/ Heat Resistance 347F |
|||||||
 |
ProFibre HT | |
|||||
Industry wide popular blade for standard
duty use in dryer sections and for cylinder cleaning and sheet shedding.
ProFibre HT is also extremely effective for calendering and finishing. Glass Fibre- Epoxy Resin Blade/ Special resin binder for added bending strength/Heat Resistance 365F |
|||||||
 |
ProFibre XT | |
|||||
| For use on dryer cylinders and calendar rolls where higher temperatures
are present and longer life required. Glass Fibre- Epoxy Resin Blade/Heat Resistance 400F |
|||||||
 |
ProCarbon | |
|
||||
| Carbon fibre blades should be used when wear resistance is critical.
Bladepro can supply a variety of configurations including 2, 4, 6, and
100% Carbon fiber. Use ProCarbon on Ceramic Press Rolls, Critical Shedding
Dryers, Calender Thermo Rolls, and heavy wear/high static positions.
Micro-Abrasive layer can be embedded in the blade to improve and maintain
roll surfaces. Carbon Fibre- Epoxy Resin Blade/ Heat Resistance Range 356F-518F |
|||||||
 |
ProGrit | |
|||||
| Tending blade consisting of glass fibre and silicon carbide abrasive.
Use ProGrit to remove rust and contamination from the surface of dryer
cylinders. Glass Fibre- Epoxy Resin Blade/120 or 180 grit silicon carbide layer/Heat Resistance 347F |
|||||||
| Metallic Blades | |||||||
    |
|||||||
Bladepro
offers a full range of metallic doctor blades in a variety of widths
and thicknesses. Tungsten Carbide Coating available on metallic materials |
|||||||
| Back to Top | |||||||
Toll Free: 1.866.677.6444 Mobile: 803.370.2440 Fax: 803.325.1182 Email: bladepro@comporium.net BLADEPRO PO Box 37117 Rock Hill, SC 29732 |
|||||||
©2005
All rights reserved. Bladepro a division of  PO
Box 37117 Rock Hill, SC 29732 |
|||||||